On one of the
panels, turn over the edge that is to be joined onto the right side of
the fabric. Make the turning 0.5" (1.3cm) wide.
2.
Press it firmly
with the iron so that it lies flat.
3.
On the other
panel, turn over the edge to be joined 0.5" (1.3cm) onto the wrong
side and press firmly.
4.
Spread the first
panel with the turning uppermost. Lay a strip of bonding web 1"
(2.5cm) wide all along the edge. Arrange it carefully so that half the
width is on the turning and half is on the main fabric.
5.
Lay the other
panel over it with the turning down, so that it just covers the bonding
web. Make sure to match the pattern if necessary.
6.
Press with a hot
iron over a damp cloth to seal the web in place. Join other panels in
the same way.
